10/07/24 - Big Baby 2 + One10 - UK

I've been using 2 x BB2 cabs for gigs and 2 x One10s for rehearsals - very happy with both. There are however some changes ahead and wanted to ask your opinion if you have time... I have a new amp coming (not yours, although I've joined the queue too) and it has the option to go to 2ohm, it's a Jad Freer Coda 800w Power Amp. Since we have PA support with a subwoofer, and space is limited I have had to reduce to 1 x BB2. Mostly this is enough, but last week I did a gig in a small venue with the 2 One10s and it sounded pretty powerful and was a breeze for fitting in the car with all the other kit. I did feel I may have been driving then a tad hard with my GR Pure Amp 800w power amp, but then the Jad Freer preamp I'm using has a bit of grit, so.... So here is the crux of it. With the new amp, would I be able to drive three One10s at the 2ohm setting? ( I'd be ordering a One10 T)I see a number of people with this arrangement, but despite reading all your info I'm still baffled by the Ohm thing, well when it goes below 4 anyhow.

The three One10s would easily fit in the car with the sub giving me a bit more spread... or will it? One last thing, with your new ZeroK 7 what cab combinations would you be recommending - this may answer my question above too. Sorry for waffling, but in fairness I have had to watch your videos so you can't complain ha ha ha All the best Awesome cabs btw, never been happier.

Tim

--------

Hi Tim,

I'd almost always make the decision based on tone - the 12XN and 10CR are quite different.

But if your amp is 2 ohm stable then you can run up to four One10 cabs, and each one you add will increase the max output and how big the rig sounds. With the Zero k7 it's the same, you can run up to four 10CR or four 12XN with all parallel wiring, or more with series/parallel (like in a Six10 or Eight10 or Four10+Two10S stack).

Glad you're loving the cabs!

Best regards,

Alex