Three10 / Three10T
Regular price
£1,099.00
Why would anyone want a 3x10" bass cab, isn't that just odd (and not just numerically!)?
In short, our Two10S is a very loud little cab but it has its limits when guitarists start rocking harder. Our Four10 (or a dual Two10S stack) goes properly loud but plenty of bassists don't need that much output. The Three10 splits the difference in terms of output whilst maintaining that uniquely warm and fat yet clear and punchy tone that our 10CR cabs have become known for - and no, they don't "sound like tens", if anything they're more like a blend of the depth and fatness of the very best heavyweight 2x15" cabs from back in the day mixed with the punch of the great 8x10" cabs, plus some added clarity and superior dispersion.
You'll notice it's a different form format to the Two10S/Four10/Six10/Eight10 family - as we had to switch to alternate impedance drivers (see below) the Three10 should not be used as part of a modular stack. Instead we've made it taller and narrower like our Super Twin, as that's just a really neat size and shape for gigging life. It's got the chunky dish and bar handles like the Four10 but the tilt and roll wheels of the Super Twin - best of both worlds!
It's taken us a long time to make this cab, simply because if we used our standard 10CR250 drivers (about which there's almost nothing "standard", they're amazing!) it would end up a very weird impedance. And weird impedances are problematic when it comes to amp matching, so we don't want that.
We finally bit the bullet in 2022 and set our man at Eminence, the esteemed McJerry, the challenge of making an alternate impedance version of the 10CR which would make a 4 ohm 3x10" possible - if you haven't got involved in loudspeaker driver you might assume that you just "change the impedance" but it's not as simple as that, it's a juggling act of voice coil wire gauge and winding pattern to get the DC resistance where you want whilst also getting the BL, inductance (and semi-inductance), Xmax, Mms and resulting Qes, Cms, Res, Fs, etc where you need. And that isn't a problem that can always be solved - for instance it's impossible to make a 4 ohm version of our 12XN550 driver without losing efficiency and/or power handling (and there's no point doing that!) We know the standard 10CR250 has outstanding tone and sonic performance so the alternate impedance version had to perfectly match that, with no compromises. And now the 10CRA is done and a 4 ohm Three10 is possible!
Need more output? You can use two of these or... well, we don't have anything else yet. But we could totally make a One10 with a 10CRA driver (12 ohm nominal impedance) that you could stack on this Three10 and have a rig that can still be considered a 4 ohm nominal load (trust us on this - impedance is an odd and complex thing and the glorious thing about 10CR or 10CRA drivers in Hybrid Resonator enclosures is that they have much smaller swings in impedance magnitude and phase than most drivers in most cabs). If you're really persuasive we could make a wider version of the One10 (sideways) so it looks really good on top of a Three10 - cloth grill only though, we don't want to order a load of steel grills for what we think would be a rather niche product...
Features
- Three 10CR extended-range drivers
- Hybrid Resonator enclosure
- Dual resonator outlets on base
- Single top strap handle
- Dual side bar/dish steel handles
- Tiltback wheels and large rubber feet
- Nickel-plated 2/3-sided steel corners
- Dual parallel combi speakon + 1/4” sockets
- Heavy duty black tolex
- Powder-coated black steel grill
- Optional high strength silver or black cloth grill
Specifications
| Dimensions (H x W x D) |
74cm x 48cm x 33cm 29" x 19" x 13" |
| Weight | |
| Steel | 21kg / 46lbs |
| Cloth | 20kg / 44lbs |
| Steel (with tweeter) | 22kg / 48lbs |
| Cloth (with tweeter) | 21kg / 46lbs |
| Broadband sensitivity | 100dB |
| Max power | 750W RMS (1200W clean) |
| Max Output | ~128dB |
| Frequency Range | 30Hz - 6kHz (-20kHz with tweeter) |
| Impedance | 4 ohm |
Customer feedback
28/05/26 - Three10T - UK
I received the Three10 cabinet this lunchtime.
You asked for feedback so:
The build quality is super... The cover is great... I'm sure it will sound great... It looks really cool...
Until I try to put my new Fender Bassman 800 Amp on top...
Am I missing something or have I ordered the wrong cabinet for this Amp?
I will need to take the feet off the amp or file down the feet so it will fit onto the cabinet. Then I will need to cover the screws heads... Should I have ordered something else as well, or made clearer what I was doing... ?
I'm sure there are a lot of Bassman amps out there that would look great on your speaker if it fitted better straight out of the box...
Any suggestions would be really appreciated!
Thanks,
Geoff
--------------------------------------------------------------------------------------
Hi Geoff,
You just need to unscrew the current feet and move them inboard. And then put some screws in the holes the feet have left behind so it looks tidy.
We do have all the cab dimensions and lots of photos on our website so customers can check all this stuff - that's not a big difference in width so it looks good anyway!
Best regards,
Alex
17/05/26 - Three10 - France
New Rig for New Project thanks to Barefaced Audio team for their beautiful work
Lilian
05/04/26 - Three10T + Activier Upsetter - UK
Incredible tight, punchy tone from the Three10T when I'm using my Precision with flats.
And for the few songs I need to switch to guitar I'm using a pedalboard amp (DSM & Humboldt Simplifier DLX) running into the Activier Upsetter 110.
So much versatility, yet so light and compact! Would love to get a stereo set-up for guitar so I can show off my stereo effects onstage, thinking of getting a passive Upsetter to make this possible 🙌
Davey
16/03/26 - Three10 - UK
I’ve tested it in a full band scenario and I’m very impressed! The cab sounds fantastic!
Kev
05/03/26 - Three10T - UK
First night out with the Three10.
Frankenjazz -> Darkglass Anagram -> Baby Sumo -> Three10.
Sounded great 😊
Alan
05/03/26 - Three10T - UK
Just wanted to let you know that the speaker arrived safely.
06/12/25 - Three10T - UK
Cab reached me yesterday afternoon - just in time for a show that night where I got to try her out. Sounded great, filled a fairly large venue (Witney Corn Exchange) and was warm and composed throughout!
The Mojotone Grill looks amazing – thanks so much, I love it!
James
11/10/25 - Big Baby 3, Big Twin 2, Three10T - USA
I own and love my 4 BF cabs. 2x Big Baby 3, 1x Big Twin 2, and a Three10T. I switch out for different venues and acoustics.
I'm also thinking of having you make me a One10 to fit atop my Three10. Same width. 4ohm total for both cabs. How much would that cost, and the estimated lead time?
Thanks for making us bassists sound even better. Your cabinets ROCK!!!
Rikk
--------------------------------------------------------------------------------------
Hi Rikk,
Here's the info on the One10W: https://
And here's the current lead times: https://barefacedaudio.
Glad the cabs are ROCKING!!!
Best regards,
Alex
24/09/25 - Three10 - USA
Hello Barefaced Team!
I love my Three10 and I’m looking for a smaller sibling with a small twist. Can you do an 8 ohm One10 in the landscape version?
I never foresee using them together and I really like taller cabs.
Thanks!
Al
--------------------------------------------------------------------------------------
Hi Al,
Yes, we can fit the One10W with an 8 ohm driver if you prefer! Glad you're loving the Three10.
Best regards,
Alex
17/08/25 - Three10T - UK
Rehearsal day and this sounds utterly immense (and looks cute too) 😁🤘
Sammy
