Celestion Ten 30
Regular price
£24.00
The best of Celestion's guitar speakers are available to customise the sound of your Barefaced AVD cab. Add your cab to the cart on the relevant product page and then add the speaker here. The price you see here is the cost we charge to replace the stock G10 Vintage with this custom driver.
If you're ordering a 2x10" or two 1x10" cabs, don't forget to add two drivers! If you only want one custom driver and one stock driver in a 2x10" or two different custom drivers, please email us to explain where to put each driver (top or bottom, left or right). We'll fit the impedance stated in your cab order. Email us if you're confused!
Celestion Ten 30
Rich and expressive, the Ten 30 is a 10 inch guitar speaker that combines warm lows with a vocal mid-range and an articulate top end. The clean sound is open and revealing; push hard and you're rewarded with full-blooded Celestion grind.
| Power rating | 30W rms |
| Impedance | 8 or 16 ohm |
| Sensitivity | 95dB |
| Frequency Range | 85Hz - 5kHz |
| Magnet Type | Ceramic |
| Speaker Weight | 1.6kg / 3.5lbs |
| Weight difference vs stock G10 Vintage | -0.8kg / -1.8lbs |
Customer feedback
10/11/25 - Usurper 210H (Ten 30 + G10 Vintage) - New Zealand
Thank you for getting the cabinet out and on good time - it made a fast track to my place, arriving this morning without a hitch and is in good working order!
It looks and sounds great. I'll send a pic of it in the heat of battle.
Can you please guide me on what I need to know if I choose to use my cabinet in mono rather than stereo?
As I understand it, it is wired that both drivers are 16ohms. What happens if I choose to use ONE amp through both speakers and flick the switch to mon? Do I need to change the ohm rating for the amp (i.e is it two 16ohm outputs, or does it change to two 8ohm outputs?)
Philip
--------------------------------------------------------------------------------------
Hi Philip,
If you switch the cab to mono then it disconnects the lower input and the top input drives both speakers in parallel, so the impedance goes from 16 ohm to 8 ohm. Hope that's clear!
Best regards,
Alex
--------------------------------------------------------------------------------------
Brilliant, thank you!
The cab is working out like I hoped - very pleased!
Philip